The United States has one of the safest water supplies in the world. The US Environmental Protection Agency sets and enforces standards for the public drinking water supply, while individual states do so for private drinking water wells. Recent rains followed by flooding in certain parts of Delaware and around the country have raised concerns about the quality and safety of our drinking water. Because drinking water quality varies from place to place depending on the condition of the water source and the treatment it receives, the best source of specific information about your drinking water is your water supplier.
Water suppliers that serve the same people year-round are required to send their customers an annual water quality report -- a consumer confidence report.
Private well owners are responsible for testing their water. They may contact private commercial laboratories certified to test drinking water quality or the Delaware Public Health laboratory (DPHL). It is recommended to test private well water annually for nitrates and coliform bacteria. More frequent testing, however, may be needed if a problem is suspected.
Consumers of public water systems are not responsible for getting their water tested. The DPHL under EPA mandate regularly tests public water systems through the Office of Drinking Water. In addition to testing for coliform bacteria and nitrates, public water systems are tested for a number of contaminants, including pesticides and trace metals.
Excessive levels of these contaminants in our drinking water may cause serious illness and sometimes death in children, the elderly and the sick.
How do I get my water tested?
The cost for private well testing is $2.00 each for a bacterial and chemical test. DPHL will not test private drinking water wells for non-prescribed chemical or bacterial contaminants unless the DE Office of Drinking Water submits the sample to the laboratory. Homeowners must contact the Office of Drinking Water or a private laboratory for this additional testing.
Private well water owners may pick up a sample form and bottle from a county office ( New Castle County, Kent County, Sussex County) or the DPHL. Follow the directions given and return in a timely manner to the office where you received the bottle.
The sample will likely be rejected if directions are not followed or the form is unreadable. For a list of laboratories certified to conduct drinking water testing, contact the Office of Drinking Water.
It takes approximately 1 week for the bacterial results and 3 weeks for the chemical results to be available. Results are sent to the appropriate county unit (private well samples) and the Office of Drinking Water (public water supply samples.) Please do not contact the lab for results.
The county health unit will then mail the test results to the private well owner. If elevated levels of contaminants are found, they will include information such as when to re-test and prevention measures such as boiling water or using bottled water.
The Office of Drinking Water sends public water test results, conducted by DPHL, to water suppliers, who are required to notify customers quickly when contaminants are found. Otherwise, reports are sent out annually.
For more information on the quality of private well drinking water, visit the EPA.
Return to Delaware Public Health Laboratory page.